久久久亚洲熟妇熟女,影音先锋制服丝袜另类专区,欧美日韩国产在线播放二区,91粉色国产福利在线观看

Horizontal machining center is a kind of machining center whose worktable is parallel to the spindle. It usually has three linear motion axes and one counter axis. After the workpiece is clamped once, the horizontal machining center can select different tools independently according to the program, automatically change the spindle speed, and complete the machining of multiple surfaces according to the programming sequence. This type of machining center is suitable for machining box parts.

Skills of selecting horizontal machining center:

1. The horizontal machining center should be installed far away from the earthquake source, not exposed to direct sunlight, no heat radiation, no humidity. If there is a seismic source near the installation position of the horizontal machining center, the anti vibration groove should be set around the horizontal machining center. If the anti vibration groove is not set, the machining accuracy and stability of the horizontal machining center will be directly affected, the poor contact and failure of electronic components will be affected for a long time, and the reliability will be affected.

2. The horizontal machining center must be under 30 ℃ for normal operation. Generally, the exhaust fan and air cooler are installed in the power distribution box of the horizontal machining center to ensure that the electronic components and CPU are in a constant temperature state. Next assignment. If the temperature and humidity are too high, the life of the control system components will be reduced, and the failure of the horizontal machining center will increase for no reason. If the humidity increases, the dust on the integrated circuit board will increase, and directly lead to faults such as poor contact and short circuit.

3. When using the horizontal machining center, the factory parameter setting of the machine tool cannot be changed at will. Because these factory parameter settings are directly related to the dynamic characteristics of each component of the horizontal machining center, the clearance compensation parameter values can only be set according to the actual situation. If you want to change the factory setting parameters, you should contact the manufacturer and change the factory setting parameters under the guidance of the manufacturer's technicians.